Raspberry Pi Camera Module V2 Yafex OV5647 Sensor 1080p for RPi 4/3B/3B+/2/Zero W with Flex Cable and rpi camera case
Please note: The LED fill lights on both sides will warm up(generally in 40 to 50℃) when they working, but it is normal, please don’t worry, they can keep working 20 hours, it will not damage the camera normally. You can adjust the micro adjustable resistor(beside the lights) to turned down the lights to Lower temperatures.
This is a Fish Eye ( Wide Angle ) Night Vision Camera For Raspberry Pi.You can use it to take a wide angle picture or video by this camera . 5 Megapixel OV5647 Sensor,Support 1080P resolution. This camera support to Raspberry Pi 3B/3B+ and Pi 2B B+.
1/4 Inch CMOS size,2.35 Focal Length and 130 Degree Diagonal Angle,Suitably use for Surveillance Camera.
There are 2 Infrared LED Light For Night Vision , 4 screw holes on the camera is used to both fix the infrared lights and connect 3.3V power output for the lights .You can use a small screwdriver to install the lights easily. 100% Satisfaction GUARANTEE: If something goes wrong,feel free to contact us,We will replace or refund for you. You can order it without any risk.
When using this camera, please note: Normal problems: 1.The computer doesn’t recognize the camera; The LED lights doesn’t work (including one on and one off); The camera doesn’t work after a period of use. Solution: Tighten the bolts of the LED and camera, then restart it. 2.The LED lights always turn on no matter if the camera is turned on or not. Solution: Connect the power supply to GPIO, then the LED light will be on only when the camera is turned on.
Specifications:
Pixel : 5 megapixel
Sensor : OV5647
CMOS size : 1/4inch
Sensor best resolution : 1080p
4 screw holes: used for attachment , connect 3.3V power output
Focal Length : 2.35
Diagonal angle : 130 degree
Dimension: 25mm x 24mm
Feature:
1. Fish eye wide angle lens
2. Night vision camera
3. 5 MP pixel
4. Support 1080P resolution
Application:
Specially design for Raspberry pi 4 model b.
Compatible with raspberry pi 3b+/3b/2b.
Compatible with raspberry pi zero/zero w.
Package including:
1x Raspberry Pi 3B+ Camera Module
1x 15cm Flexcable for Pi 4/3B+/3B/2
1x 15cm Flexcable for Pi ZERO W
1x Camera bracket
1x Leftlight
1x Rightlight
Several Screws
Reviews
There are no reviews yet.