Name: Raspberry Pi 4 Camera Module Yafex 1080p OV5647 Sensor compatible with RPi 3B+/3B/Zero W with Flexcable and bracket
SKU: GI-LLL000856001
Price: 26.99 USD
Availability: InStock

Raspberry Pi 4 Camera Module Yafex 1080p OV5647 Sensor compatible with RPi 3B+/3B/Zero W with Flexcable and bracket

$26.99

Please note: The LED fill lights on both sides will warm up(generally in 40 to 50℃) when they working, but it is normal, please don’t worry, they can keep working 20 hours, it will not damage the camera normally. You can adjust the micro adjustable resistor(beside the lights) to turned down the lights to Lower temperatures.
SUPPORT TYPE:Raspberry Pi Zero /W，SUPPORT FOR PIXELS: The camera is capable of 2592 x 1944 pixel static images, and also supports 1080 p 30 fps, 720 p 60 fps and 640 x480 p 60/90 video recording
SENSOR: 5 megapixel OV5647 sensor ,Supports up to 2 infrared LED and/or fill flash
SUPPORT VERSIONS: Raspberry Pi Night Vision Camera, supports all revisions of the raspberry pi(raspberry pi 2/3 need change ffc cable); Note:There is no raspberry pi zero board and FPC cable inside the package.
When using this camera, please note: Normal problems: 1.The computer doesn’t recognize the camera; The LED lights doesn’t work (including one on and one off); The camera doesn’t work after a period of use. Solution: Tighten the bolts of the LED and camera, then restart it. 2.The LED lights always turn on no matter if the camera is turned on or not. Solution: Connect the power supply to GPIO, then the LED light will be on only when the camera is turned on.

Raspberry Pi 4 Camera Module Yafex 1080p OV5647 Sensor compatible with RPi 3B+/3B/Zero W with Flexcable and bracket

Raspberry Pi night vision camera compatible with Raspberry Pi 4 Model B,Raspberry Pi 3 Model B+ and Zero W
5 million pixel OV5647 camera
Lens : 1/4 5M
Aperture (F): 1.8
Focal length (Focal Length): 3.6MM ( adjustable)
FOV (Diagonal): 75.7 degrees
Best pixel sensor : 1080p
Dimension: 75mm x 25mm x 25mm
Sleek , perfect design
Metal frame, both the screw holes , but also a power connector
3.3V power supply interface can be accessed sensitive infrared lamp or other device
Can access sensitive lights
Four screw holes can be installed Sensitive infrared light Or other fill light , you can switch freely , no longer worried about the light is too weak, underexposed.
Sensitive infrared light
Transparent lights for 1W high power infrared light photoreceptor 850
Photoresistor : detecting ambient light intensity
Adjustable resistance: open automatically adjust the ambient light intensity of infrared light threshold

Package including:
1x Raspberry Pi 3B+ Camera Module
1x 15cm Flexcable for RPi 4/3B+/3B/2
1x 15cm Flexcable for RPi ZERO W
1x Camera bracket
1x Leftlight
1x Rightlight
Several Screws