M5Stick Mini Development Kit ESP32 1.3’OLED

M5Stick Mini Development Kit ESP32 1.3’OLED

M5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board.

What it can do?

This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process.

M5stickC is one of the core devices in M5Stack product series which is built in a continues growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source code & engineering community that will help you maximum your benefit in every step of the developing process.

Product Features
5V DC power supply
USB Type-C
ESP32-based
4 MByte Flash + 520K RAM
9-Axis IMU MPU9250(only gray type)
Red LED
Buzzer
IR transmitter
1 Buttons, OLED(1.3 inch), 1 Reset
2.4G Antenna: Proant 440
80 mAh Lipo Battery
Extendable Socket
Grove Port
Wearable & Wall mounted
Development Platform UIFlow, MicroPython, Arduino

ESP32 Features
240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
Integrated 520 KB SRAM
Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
Integrated dual mode Bluetooth (classic and BLE)
Hall sensor
10 x capactive touch interface
32 kHz crystal oscillator
PWM/timer input/output available on every GPIO pin
SDIO master/salve 50MHz
SD-card interface support

Pack List
1x M5Stick
1x USB Type-C cable

Gray type:

Accessories: WATCH BELT, WALL/1515 and BRICK