M5stack M5StickC Development Kit with Hat
Noted: There are two colors of belt, orange and red. We would ship it randomly per our stock. Hope you can understand!
M5Stick-C is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board.
What it can do?
This tiny block is able to realize your idea, enlighten your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process.
M5stickC is one of the core devices in M5Stack product series which is built in a continues growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source code & engineering community that will help you maximum your benefit in every step of the developing process.
Power switch operation:
Power on :Long press power button for 2 seconds
Power on :Short press power button for 6 seconds
Notice:
Baudrate supported by M5StickC: 1200 ~115200, 250K, 500K, 750K, 1500K
Only Orange type is available for now
If you find out your M5StickC couldn’t power on without a USB in, it might because the battery enter the battery protection mode, caused by low-volatge, over-charged, ver-heat … To exit the battery protection mode, please keep charging the battery for around 40 mins. Our team is working on the solution.
M5StickC Development Kit Features
5V DC power supply
USB Type-C
ESP32-based
4 MByte Flash
6-Axis IMU MPU6886
Red LED
IR transmitter
Microphone
2 Buttons, LCD(0.96 inch), 1 Reset
2.4G Antenna: Proant 440
80 mAh Lipo Battery
Extendable Socket
Grove Port
Wearable & Wall mounted
Development Platform UIFlow, MicroPython, Arduino
ESP32 Features
240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
Integrated 520 KB SRAM
Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
Integrated dual mode Bluetooth (classic and BLE)
Hall sensor
10x capactive touch interface
32 kHz crystal oscillator
PWM/timer input/output available on every GPIO pin
SDIO master/salve 50MHz
SD-card interface support
02
Kit with 2 hat:
Hat ENV It is able to detect the temperature, humidity, air pressure and magnetic field. This product relates via I2C protocol which allows you to obtain 4 types of environment data thru just 2pins, together with the tiny body, makes it a powerful application for envitonment data collecting.
Hat SPK is an M5StickC compatible speaker, integrated PAM8303 amplifier (3w single channel type D power amplifier), High PSRR and differential inputs eliminate noise and rf interference, thus it has the characteristics of simple functions and high audio reproduction.
Reviews
There are no reviews yet.