M5Stack ESP32 Basic Core IoT Development Kit

M5Stack ESP32 Basic Core IoT Development Kit

M5Stack BASIC Kit, like its namesake, is a starter kit among the M5Stack development kit series. Its modular, stackable, scalable, and portable device is powered with an ESP-32 core, which makes it open source, low cost, full-function, and easy for developers to handle new product development on all stages include circuit design, PCB design, software, mold design and production. This Basic kit provides a friendly price and full-featured resources which makes it a good starter kit for you to explore IoT.

Ever wanted to explore the fastest way of IoT prototyping, M5Stack development board is the perfect solution. Not like others, M5Stack development board is highly productlized, covered with industrial grade case, and ESP32-based development board. ESP32 is a hybid Wi-Fi & Bluetooth chip contains a dual-core and 4MB of SPI Flash . Together with 30+ M5Stack stackable modules( M5Modules-link ) , 40+ extendable units( M5Units-link ), and different levels of program language, you can create and verify your IoT product in a very short time. Supported development platforms and program languages: Arduino, Blockly language with UIFlow(link), Micropython. Regardless of what level program skill you have, M5Stack would guide you in every step of the way to realize your idea as well as to the final productilization.

If you ever played with ESP8266, you would realize that ESP32 is a perfect upgrade from ESP8266. In comparison, ESP32 is full-feathered with more GPIO, plenty of analog inputs and two analog outputs, multiple extra perpherials( like a spare UART ). Official development platform ESP-IDF have planted with FreeRTOS. With dual-core and real time OS you can get more organized code and much high speed processor.

M5Stack Basic is consist with two separable parts. the top part has all kinds of processor, chips and some other slot components. The bottom part has a lithium battery, M-BUS(link) socket and extendable pins on both sides.

Notice:
1).Basic kit have no IMU sensor inside.
2).GPIO0, GPIO12, GPIO13, GPIO15, GPIO34, pins that related to I2S are not extended out.

Product Features
5V DC power supply
USB Type-C
ESP32-based
4 MByte flash + 520K RAM
Speaker, 3 Buttons, LCD(320*240), 1 Reset
2.4G Antenna: Proant 440
TF card slot (16G Maximum size)
Battery Socket & 150 mAh Lipo Battery
Extendable Pins & Holes
Grove Port
M-Bus Socket & Pins

Program Platform:
ESP32 Features
240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
Integrated 520 KB SRAM
Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
Integrated dual mode Bluetooth (classic and BLE)
Hall sensor
10x capactive touch interface
32 kHz crystal oscillator
PWM/timer input/output available on every GPIO pin
SDIO master/salve 50MHz
SD-card interface support

Kit includes:
1x BASIC
10x Dupont
1x Type-C USB(20cm)
1x User Manual
1x Sticker