LX-224 three channels bus high voltage servo is a serial bus servo with three connectors. Compared with the traditional 7.4v servo, the 11.1V high-voltage servo can reduce the current by more than 60%. The servo can also be connected in series, simplifying the wire connection.
Use serial bus servo connector to connect the servo one by one, beautify the looking and facilitate the wiring.
The internal high accuracy potentiometer can receive angle feedback of the robot.
High voltage servo significantly reduces the power needs and increases the service time of servo.
Use high-precision potentiometer to feedback the angle position.
Equipped with position/temperature/voltage feedback, protect the servo from burning.
Support two working mode: Servo mode ( rotation range: 0-240) and Gear motor mode ( rotation range: 0-360).
Use metal gear to extend the service time.
Fixed double-shaft drives the rotation of the bracket and maintains the stability of robot joints.
|Default Wire||20cm(7.9inch) in length|
|LX-224 HV Servo Package List||1* LX-224 HV bus servo
1* 20cm servo wire
1* primary servo horn(4mm/0.157in thick)
1* assistant servo horn(2mm/0.078in thick)
15* M2*5 self-tapping screws
2* primary assistant screws