KittenBot Meowbit Codable Console for MakeCode Arcade
Meowbit is a programmable game console that you can code the unique game by yourself with Makecode arcade and Python. Also, for it can compatible with most Micro:bit extension boards, it can work as a control panel to help you create a robot. The appearance design is 1.8inch 160 x 128 TFT color screen that makes the game more intuitive. It is funny that not only it has DFU mode button, reset button, but also 6 programmable buttons, you can enjoy the special game interface and operation mode. Built-in light sensor, temperature sensor, SD card slot, buzzer, SD card slot, and JAC interface. Moreover, it has the excellent function is that support multiplayer connector, multiple languages and draft the chart. It is compatible with Microbit’s 40 PINs Goldfinger. Meowbit is great for exercise teenager coding ability, it is a very interesting programming game machine for your child to learn to program.
All pins are brought out to 0.1″ headers that are color coded black for ground, red for power, and yellow for signal. You can breadboard easily by matching up with these premium header jumpers
On-board buzzer: you can use the music module in MakeCode to play music, and now you’ll get audible beeps! If you want to use headphones, a 3.5mm audio connector on the board is available as well.
Two LEGO-compatible pin holes for easy assembly and integration.
5 x alligator clip gold pads, the same as the ones on the micro:bit
USB connector with on/off push button switch so you can turn projects on and off – the micro:bit doesn’t have a switch which means unplugging instead, this is easier!
Includes 1A self-recovery fuse to help keep your projects protected.
1.8inch 160 x 128 TFT color screen
Contains 6 programmable buttons,1 buzzer, DFU mode button, mp6050 gyroscope, JAC interface
Built-in light sensor, temperature sensor, SD card slot (For external storage)
Support multiplayer connector and edge connector, multiple languages and draft the chart
Compatible with Microbit’s 40 PINs Goldfinger
MCU：STM32F401RET6, 32-bit ARM Cortex M4 core
Operating voltage: 3.3V
Supply voltage: USB(5V), Lithium battery pack(3.7~4.2V)
Output current: 500mA(max)
Please Note: this is only the shield – micro:bit is not included
Power supply mode: USB5V power supply. This power supply mode requires pressing the blue power switch.
Working voltage: 3V-5V (5V sensor module is not supported under 3V power supply).
Output current: 3V and 5V power interface with maximum output 1A.
Serial port extraction: serial port can map IO port.
I2C port leads: pins 19 and 20 can only be used as I2C function pins. They cannot be read and written as ordinary IO ports.
SPI port leads: 14, 15 (IO port can be read and written).
Dimensions: 57mm x 44mm x 12mm
1 x Meowbit game console
1 x USB wire
2. Light sensor
3. Power switch
4. Programmable led x 2
6. DFU mode button (use for toggle firmware or for bringing up to menu in Makecode Arcade mode)
7. 160 x 128 TFT color screen
8. Temperature sensor
9. Direction button x 4
11. Button A, B x 2
12. Compatible with microbit’s 40 PIN Goldfinger
13. USD program download port/charging ports
14. SD card slots (use for store program or extend wireless modules)
15. Multiplayer connector
16. Mp6050 gyroscope
17. 3.7V lithium battery package interface
19. 2MByte spi-flash (default download Unicode character table)
20. Signature area