LD-27MG is a full metal gear standard digital servo with 20kg large torque, using aluminum case for Robotic RC Car with control angle 270 degrees.
Feature
20kg large torque. 20 kg·cm (277.6 oz·in) @ 6.6V. Dimension: 40mm*20mm*40.5mm(1.57inch*0.78inch*1.59inch).
Full metal gear. Improve servo’s accuracy and extend its service time.
Aluminum Case enhances heat dissipation and ensures servo motor work properly.
Use high-precision potentiometer with a new design. Accuracy and linearity have been greatly improved! Accurate movement can help you build up robots.
270 degrees rotation. Controllable angle range from 0 to 270 degrees, excellent linearity, precision control. It can rotate within 360 degrees when power off.
Item | Specification |
Weight | 65g(2.32OZ) |
Dimension | 40mm*20mm*40.5mm(1.57inch*0.78inch*1.59inch) |
Speed | 0.16sec/60°(7.4V) |
Torque | 20 kg·cm (277.6 oz·in) @6.6V |
Working Voltage | 6-7.4V |
Min Working Current | 1A |
No-Load Current | 100mA |
Spline | 25T(6mm in diameter) |
Servo Wire | 30cm(11.8inch) in length |
Control Method | PWM |
Pulse Width | 500~2500 |
Duty Ratio | 0.5ms~2.5ms |
Pulse Period | 20ms |
Wire Layout | red wire: + black wire: GND white wire: PWM/signal |
Package List | 1* digital servo 1* screw horn kit |
Please make sure that the duty cycle of the controller you used is confirmed to our specifications, otherwise the servo can’t turn up to a claimed degree.
Important Tips
- Recommend to use lithium polymer battery with high rate discharge(min 5C), please don’t use the dry battery.
- Please use a short and thick power cord, don’t use Dupont cord.
Reviews
There are no reviews yet.